User Contributed                                           MET/CAL PROCEDURE
=============================================================================
INSTRUMENT:            Tektronix 2901:Time Mark Generator
DATE:                  08-Jun-95
AUTHOR:                User Contributed
REVISION:              0
ADJUSTMENT THRESHOLD:  70%
NUMBER OF TESTS:       22
NUMBER OF LINES:       185
CONFIGURATION:         HP 5335A
=============================================================================
 STEP    FSC    RANGE NOMINAL        TOLERANCE     MOD1        MOD2  3  4 CON
  1.001  ASK-                        P                            F
  1.002  ASK+                                          X
  1.003  HEAD         ÍÍ INITIAL CONDITIONS ÍÍ
  1.004  HEAD         Allow the UUT a 2 hour warm-up.
  1.005  HEAD         {}
  1.006  HEAD         {ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»}
  1.007  HEAD         {º CRYSTAL FREQUENCY TEST º}
  1.008  HEAD         {ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ}
  1.009  HEAD         {}ÍÍ CRYSTAL FREQUENCY TEST ÍÍ
  1.010  JMP          2.001
  1.011  EVAL
  2.001  DISP         Set the UUT front panel controls as follows:
  2.001  DISP         MARKER SELECTOR .................................. 0.1æs
  2.002  IEEE         [@5335] [TERM LF]
  2.003  IEEE         [@5335] IN[D2000];
  2.004  IEEE         [@5335] FN1,AU1,AA1,AZ0;
  2.005  DISP         Connect the UUT MARKER OUT BNC connector to the 5335A
  2.005  DISP         INPUT A connector through a 50 ê feedthrough.
  2.006  IEEE         [@5335] [I][D3000][I]
  2.007  MEM/         1000000
  2.008  MATH         MEM1 = 10
  2.009  MEME
  2.010  MEMC         MH             0.000100U     .1æs
  3.001  DISP         Set the UUT front panel controls as follows:
  3.001  DISP         MARKER SELECTOR ................................... 50ns
  3.002  IEEE         [@5335] [I][D3000][I]
  3.003  MEM/         1000000
  3.004  MATH         MEM1 = 20
  3.005  MEME
  3.006  MEMC         MH             0.000200U     50ns
  4.001  DISP         Set the UUT front panel controls as follows:
  4.001  DISP         MARKER SELECTOR ................................... 10ns
  4.002  IEEE         [@5335] [I][D3000][I]
  4.003  MEM/         1000000
  4.004  MATH         MEM1 = 100
  4.005  MEME
  4.006  MEMC         MH             0.001000U     10ns
  5.001  DISP         Set the 5335A INPUT C SENSITIVITY fully cw to the MAX
  5.001  DISP         position.
  5.002  DISP         Disconnect the UUT from the 5335A INPUT A and connect
  5.002  DISP         to the 5335A INPUT C (with no 50 ê feedthrough).
  5.003  IEEE         [@5335] FN5;
  5.004  DISP         Set the UUT front panel controls as follows:
  5.004  DISP         MARKER SELECTOR .................................... 5ns
  5.005  IEEE         [@5335] [I][D3000][I]
  5.006  MEM/         1000000
  5.007  MATH         MEM1 = 200
  5.008  MEME
  5.009  MEMC         MH             0.002000U     5ns
  6.001  DISP         Set the UUT front panel controls as follows:
  6.001  DISP         MARKER SELECTOR .................................... 2ns
  6.002  IEEE         [@5335] [I][D3000][I]
  6.003  MEM/         1000000
  6.004  MATH         MEM1 = 500
  6.005  MEME
  6.006  MEMC         MH             0.005000U     2ns
  7.001  HEAD         {}
  7.002  HEAD         {ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»}
  7.003  HEAD         {º MARKER TIMING ACCURACY TEST º}
  7.004  HEAD         {ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ}
  7.005  HEAD         {}ÍÍ MARKER TIMING ACCURACY TEST ÍÍ
  7.006  DISP         Set the UUT front panel controls as follows:
  7.006  DISP         MARKER SELECTOR .................................. 0.5æs
  7.007  IEEE         [@5335] [TERM LF]
  7.008  IEEE         [@5335] IN[D2000];
  7.009  IEEE         [@5335] FN9,AU1,AA1,AZ0,AF1;
  7.010  DISP         Connect the UUT MARKER OUT BNC connector to the 5335A
  7.010  DISP         INPUT A connector through a 50 ê feedthrough.
  7.011  IEEE         [@5335] [I][D3000][I]
  7.012  MEM*         1000000
  7.013  MATH         MEM1 = .5
  7.014  MEME
  7.015  MEMC         æs             0.0000050U
  8.001  DISP         Set the UUT front panel controls as follows:
  8.001  DISP         MARKER SELECTOR .................................... 1æs
  8.002  IEEE         [@5335] [I][D3000][I]
  8.003  MEM*         1000000
  8.004  MATH         MEM1 = 1
  8.005  MEME
  8.006  MEMC         æs             0.000010U
  9.001  DISP         Set the UUT front panel controls as follows:
  9.001  DISP         MARKER SELECTOR .................................... 5æs
  9.002  IEEE         [@5335] [I][D3000][I]
  9.003  MEM*         1000000
  9.004  MATH         MEM1 = 5
  9.005  MEME
  9.006  MEMC         æs             0.000050U
 10.001  DISP         Set the UUT front panel controls as follows:
 10.001  DISP         MARKER SELECTOR ................................... 10æs
 10.002  IEEE         [@5335] [I][D3000][I]
 10.003  MEM*         1000000
 10.004  MATH         MEM1 = 10
 10.005  MEME
 10.006  MEMC         æs             0.00010U
 11.001  DISP         Set the UUT front panel controls as follows:
 11.001  DISP         MARKER SELECTOR ................................... 50æs
 11.002  IEEE         [@5335] [I][D3000][I]
 11.003  MEM*         1000000
 11.004  MATH         MEM1 = 50
 11.005  MEME
 11.006  MEMC         æs             0.00050U
 12.001  DISP         Set the UUT front panel controls as follows:
 12.001  DISP         MARKER SELECTOR ................................... .1ms
 12.002  IEEE         [@5335] [I][D3000][I]
 12.003  MEM*         1000
 12.004  MATH         MEM1 = .1
 12.005  MEME
 12.006  MEMC         ms             0.0000010U
 13.001  DISP         Set the UUT front panel controls as follows:
 13.001  DISP         MARKER SELECTOR ................................... .5ms
 13.002  IEEE         [@5335] [I][D3000][I]
 13.003  MEM*         1000
 13.004  MATH         MEM1 = .5
 13.005  MEME
 13.006  MEMC         ms             0.0000050U
 14.001  DISP         Set the UUT front panel controls as follows:
 14.001  DISP         MARKER SELECTOR .................................... 1ms
 14.002  IEEE         [@5335] [I][D3000][I]
 14.003  MEM*         1000
 14.004  MATH         MEM1 = 1
 14.005  MEME
 14.006  MEMC         ms             0.000010U
 15.001  DISP         Set the UUT front panel controls as follows:
 15.001  DISP         MARKER SELECTOR .................................... 5ms
 15.002  IEEE         [@5335] TR1,AT1.40;
 15.002  IEEE         [@5335] [I][D3000][I]
 15.003  MEM*         1000
 15.004  MATH         MEM1 = 5
 15.005  MEME
 15.006  MEMC         ms             0.000050U
 16.001  DISP         Set the UUT front panel controls as follows:
 16.001  DISP         MARKER SELECTOR ................................... 10ms
 16.002  IEEE         [@5335] [I][D3000][I]
 16.003  MEM*         1000
 16.004  MATH         MEM1 = 10
 16.005  MEME
 16.006  MEMC         ms             0.00010U
 17.001  DISP         Set the UUT front panel controls as follows:
 17.001  DISP         MARKER SELECTOR ................................... 50ms
 17.002  IEEE         [@5335] [I][D3000][I]
 17.003  MEM*         1000
 17.004  MATH         MEM1 = 50
 17.005  MEME
 17.006  MEMC         ms             0.00050U
 18.001  DISP         Set the UUT front panel controls as follows:
 18.001  DISP         MARKER SELECTOR .................................... .1s
 18.002  IEEE         [@5335] [I][D3000][I]
 18.003  MATH         MEM1 = .1
 18.004  MEME
 18.005  MEMC         s              0.0000010U
 19.001  DISP         Set the UUT front panel controls as follows:
 19.001  DISP         MARKER SELECTOR .................................... .5s
 19.002  IEEE         [@5335] [I][D3000][I]
 19.003  MATH         MEM1 = .5
 19.004  MEME
 19.005  MEMC         s              0.0000050U
 20.001  DISP         Set the UUT front panel controls as follows:
 20.001  DISP         MARKER SELECTOR ....................................  1s
 20.002  IEEE         [@5335] [I][D3000][I]
 20.003  MATH         MEM1 = 1
 20.004  MEME
 20.005  MEMC         s              0.000010U
 21.001  DISP         Set the UUT front panel controls as follows:
 21.001  DISP         MARKER SELECTOR ....................................  5s
 21.002  IEEE         [@5335] [T0][I][D3000][I]
 21.003  MATH         MEM1 = 5
 21.004  MEME
 21.005  MEMC         s              0.000050U
 22.001  HEAD         {}
 22.002  DISP         {ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»}
 22.002  DISP         {º THIS COMPLETES THE VERIFICATION º}
 22.002  DISP         {ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ}
 22.003  END